[. . . ] ® A Division of Cisco Systems, Inc. Stacking/Wall Mount Bracket Instructions Wall Mounting Mount your wireless devices up high for optimum signal coverage or use it to get your wired networking devices off your desk and out of the way. [. . . ] 2 Remove the four rubber feet from the device, line up and snap the mounting plate onto the device as shown. 3 Line up the Bracket's mounting holes with the screws on the wall, place the device over the screws, and slide it down into place. Mounting Holes 3 16" (8. 4 cm) 5 Figure 1: Wall Mounting Stacking The Stacking/Wall Mount Bracket can also be used to securely stack Linksys compact components on top of standard-sized ones. Its feet mate to the top of a standard-sized device, while depressions on the bracket accept the foot-spacing of the smaller devices. [. . . ] Remove the four rubber feet from your device, line up and snap the Stacking/Wall Mount Bracket onto the device, as shown. [. . . ]